Bay window curtain rod – If you are looking for a way to convert the bay window in a cozy corner, installing curtain rods and window curtains. You can install a traditional curtain bar just about every window or a curtain rod bay window longer on all the windows, depending on the look you want. Use a curtain rod bay window to create single loot or complete wall panels on the whole. If you use traditional curtain rods, auctions at the end of the bars should be small enough to fit in the space provided. Measure 4 inches above the window with a tape measure. Measuring 3 inches from the outside of one of the outer windows. Mark the point with a pencil. Place the corresponding outer support in place. Drill holes in the wall in the right positions for support. Use screws and a screwdriver or drill with a drill to screw the wall bracket.
Repeat the process along the outer edge of the window bay opposite on the other side of the set. Measure 4 inches above the middle window. Find the center point between the first and second window. Mark with a pencil. Drill a hole. Screw the rod holder on the wall. Repeat the process between the second and third window, if you are using a bay window curtain rod. If you are using a traditional curtain rod, mark the center.
Measure the length of the closing of the curtain rod. Add 1/4 inch to the measurement. Measure the distance from the center mark. Mark with a pencil. Drill holes in his support. Screw the bracket on the wall. Repeat the process for the media in the next window. Place the bar Board by the manufacturer’s instructions. Install the tension pulley cable following the manufacturer’s instructions, if needed. Slip drapes or curtains on the rod in your favorite style for the type of curtain or curtain. Hang the bay window curtain rod on the brackets and supports.