Make Bay Window Seat Cushion – There is something very nostalgic over a seat tucked neatly under a number of windows, which gives a nearly panoramic view of the outdoors. If you have a place bay windows beckoning you to come sit enjoy the view you are lucky indeed. However, if you do not also blessed with a nice thick pad place to sit, you are probably looking at the bay over to look out of it.
Instructions for make bay window seat cushion, you need to measure the seat bay windows. Measure the width is at the back and front. Now measure how deep it is in the center. Now the angles take care of themselves, just connect the two lines. Next you need your supplies. The thickness of the plywood is unimportant if the pillow will rest on an existing site. You need foam, the thicker the better. Get enough to fit your measurements exactly. You also need padding and upholstery fabric, for these you need enough for your measurements plus 8 “extra on all four sides.
Next steps for make bay window seat cushion cut all the material. Remember the batting and fabric to cut 8″ more than your measurements all the way around. After that, you put it all together. Lay the fabric up and down and spread it out evenly. On top of this, add batting evenly. Finally put plywood on top. Now you’re ready to staple (or nail) it. Take your thin strips of cardboard and fold the edge of the padding and fabric layers around once before stapling or nailing the two layers of fabric / batting and carton. Start at the front, then back the next, pulling enough to smooth out the fabric and soften corners of the foam. Next do the sides in the same way. When you get to the corners, fold inward, creating a neat line on the outside, place now your new cushion in the window seat to sit down to comfortably enjoy the view!