Pleated window shades -First rview the documentation and parts from Smith + Noble package to ensure that you have everything for installation. Second, merasure 2 1/2 inches inward from the top edge of the window frame, if you install an inside mount. This means that the blind will hang along the inside of the frame. Place the bracket with the long side flush to the top of the window frame, and secure it with screws. Repeat the process for the other bracket.
Third steps to installing noble + pleated window shades, keel the blinds centered over the window to an outside mount, if it is almost flush with the wall. Make a mark on the wall at each end of the head rail with a pencil. The main railway is the top bar of the blinds. Draw a map mark along the bottom of the head rail on each side. Install the brackets with the short side facing the wall above the window.
Place each bracket 2 1/2 inches outward from the pencil icon mark and level with the horizontal. Repeat the process with the second bracket. Fifeth, place the head rail in both brackets. Pushing back until you feel blinds pop into place. Fiveth, pall the cord to raise and lower the blinds. If properly installed, the blinds do not move around in parentheses. Smith + noble pleated window shades finished now.